EDIT SAMPLE
Page 144 S3200XL Operator’s Manual - Version 1.00
the S3200XL applies software logic to the sample to calculate what it
believes is the right answer but, like autolooping, whilst the S3200XL
will often help you, it is not always infallible. The
function only applies to the CYCLIC mode of timestretch.
This sets the percentage by which the sample will be stretched or
shrunk. The range is 25% to 2000% (although we are the first to admit
that such extremes are only going find favour with the truly mad!). As
this parameter is adjusted, you will see the length of the sample
changing in the adjacent field and in the field
above that.
As mentioned, there are two ways in which you can stretch a sample
and this is selected here. CYCLIC uses a fixed cycle time at which the
S3200XL will stretch. When INTELL is selected here, the S3200XL
makes its own decisions as it proceeds with the stretching process.
Be warned, though! Although the intelligent mode will produce better
results, the time taken for this operation is much longer than when the
CYCLIC mode (up to several minutes depending on the length of the
sample and the amount of stretch).
Remember that to perform any of these operations, you will need to
have enough free memory.
This sets a level of intelligence for the S3200XL to work with when
performing an intelligent timestretch. It sets the number of decisions it
will make as it works its way through the sample. With lower values set
here, it will not make so many examinations of the sound. With higher
settings, it will examine the sound in great detail and so produce
better results although this will take longer. This control only has a
function when INTELL is selected.
This sets a crossfade between the original and the inserted data. It is
recommended that when low values are set, this should be set
high and vice versa. This control only has a function when INTELL is
selected.
To Next Page
Loading...
Need help?
General
