GLOBAL
Page 276 S3200XL Operator’s Manual - Version 1.00
NAMING SONGS
To name a song, simply press the NAME key and enter a name of up to 12 characters in the
usual way, completing the action by pressing ENT/PLAY.
SAVING A SONG
To save a song, go to the SAVE mode and select CURSOR ITEM ONLY as the save type.
Move the cursor to the song name (this will be TL1 if you have not named it) and press F7 or F8
depending on whether you wish to wipe the disk/volume as you save.
Of course, if you wish, you may also select ENTIRE VOLUME to save not only the SONG but
also the samples, programs, multi and effects file currently in memory.
LOADING A SONG
In the LOAD mode, select CURSOR ITEM ONLY as the load type and move the cursor to the
song name. Press F7 or F8 depending on whether you want to clear the current contents of
the memory or not.
If you saved the song as ENTIRE VOLUME or MULTI+P+S, you will probably want to load it
using this selection so that any programs, samples, multis and effects that may be associated
with this song are also loaded.
To Next Page
Loading...
Need help?
General
