GLOBAL
Page 236 S3200XL Operator’s Manual - Version 1.00
PERFORMING A MIDI SAMPLE DUMP
When all the parameters are set up, press the key to initiate transmission. Once the
handshake protocol has been successfully initiated between the two devices, data transfer will
take place. A new soft key, ABORT, will appear. Press this if you want to terminate the
transmission prematurely.
There is no receive key on the S3200XL as reception of bulk data will automatically take place
once a remote device initiates the dump protocol.
NOTE: It is quite likely (if not certain) that sample editors will not work if you use the S3200XL
protocol because the editor will not have the ability to recognise the new file header
information present because of the new features in the S3200XL. No doubt, manufacturers of
these editors will soon upgrade their software to overcome this. In the meantime, you should
use the standard MIDI sample dump protocol to exchange sounds between your editor and
the S3200XL.
To Next Page
Loading...
