EDIT PROGRAM - SINGLE
Page 62 S3200XL Operator’s Manual - Version 1.00
DELETING PROGRAMS
It is possible to delete programs using the key - F8. Pressing this will give you the
following prompt:
You should press F7 or F8 accordingly. If you press GO, you may receive the prompt:
This is asking if you want to delete the samples contained within that program as well. If the
samples are used in other programs, then you will not receive this prompt. If you wish to lose
the samples, press F8 - YES but if you need to keep them, press F7 - NO.
NOTE: Deleting samples and programs is ultimately destructive. Please ensure that you have
saved them to disk before deleting in case you want to come back to them at a later date.
To Next Page
Loading...
