EFFECTS EDIT
Page 196 S3200XL Operator’s Manual - Version 1.00
REVERSE REVERB
So far, we have seen the parameters for the ‘natural’ reverb effects. There are, however,
certain special reverb types which can also be selected in the TYPE parameter. If REVERSE is
selected, you will see this screen:
This has this effect on the sound:
PRE-DELAY
TIME
In this effect, the reverb decay of the sound is read out backwards. The parameters are:
This sets the time before the reverse reverb will start sounding.
This sets the length of the reverse reverb.
This has the effect of making the reverse sound more or less ‘grainy’ and
‘echoey’.
To Next Page
Loading...
Need help?
General
