SINGLE MODE
S3200XL Operator’s Manual - Version 1.00 Page 29
SETTING PROGRAM LOUDNESS AND VELOCITY
In the page, you may set the program’s overall loudness and velocity sensitivity:
The parameters are:
This sets the overall loudness for the program and affects the level appearing
at the main left/right outputs, the individual outputs and the real-time digital
audio output. It will also affect the level going to the internal effects.
NOTE: You will note that at a setting of 99, the program is at maximum level but you will not
have any velocity sensitivity.
This sets the program’s sensitivity to velocity. As mentioned, with
set to 99, this parameter will have no effect.
To Next Page
Loading...
Need help?
General
