GLOBAL
Page 288 S3200XL Operator’s Manual - Version 1.00
SAVING CUE LISTS
You may save a cue list and its programs and samples by selecting ENTIRE VOLUME as the
save type - this will save all the programs, samples and effects file associated with the cue list to
disk.
It is also possible to save any number of cue lists to disk. To do this, go to the SAVE page and
select CURSOR ITEM ONLY. Place the cursor on the cue list file you wish to save then press
F8 - GO. This will save the cue list to disk. Any number of cue lists can be saved to a disk
although only one can exist in the S3200XL at any one time.
LOADING CUE LISTS
When a disk is inserted into the S3200XL’s disk drive on power up, the cue list file will be
loaded along with the programs and samples. This also applies if ENTIRE VOLUME is specified
as the load type.
Loading an individual cue list is done by going to the LOAD and selecting CURSOR ITEM
ONLY and placing the cursor on the cue list file –with the suffix ‘Q’ alongside the file– you wish
to load. Pressing F8 - GO - will load the selected cue list into the S3200XL.
To Next Page
Loading...
Need help?
General
