INTRODUCTION
Page 4 S3200XL Operator’s Manual - Version 1.00
• EDITING FEATURES
EDIT SAMPLE Trim, Loop (with FIND and CROSSFADE functions), Join,
Merge, Splice, Chop, Extract, Reverse, Gain normalisation,
Timestretch, Re-sample.
EDIT PROGRAM Resonant lowpass filters, 2nd bank of resonant multi-mode
filters, ADSR envelope generator (with templates), 2 x multi-
stage envelope generator (with templates), 2 x multi-wave
LFOs, sample layering, 4-way velocity crossfade and
switching, keygroup crossfade, portamento (rate and time
modes), monophonic legato triggering, mute group function,
panning and autopanning, held pitchbend mode, separate
pitchbend up/down ranges, output selection.
MULTI Part select, program select, MIDI channel, level, pan,
transpose, fine tune, output routing, FX routing, FX send, low
key range, high key range, note priority.
EFFECTS In the two multi-effects channels:
DISTORTION - distortion, level
EQ - low gain, mid 1 gain, mid 2 gain, high gain,
RING MODULATION - frequency, depth
MODULATION EFFECTS - chorus, flange, phase shift, rotary
speakers, autopan/frequency mod, pitch shift with parameters
as appropriate.
DELAY - effect select (mono, stereo, ping pong), delay times,
feedback.
REVERB - effect select (large hall, small hall, large room, small
room, gated, reverse, etc.), size, decay time, HF damping, LF
damping, pre-delay.
FX DIRECTION:
dist/EQ/ring mod > mod/delay + reverb (parallel)
dist/EQ/ring mod > mod/delay > reverb (series)
dist/EQ/ring mod > reverb > mod/delay (series)
In the two reverb channels:
Effect select (large hall, small hall, large room, small room,
reverse, gated, etc.), decay time, HF damping, LF damping,
pre-delay, diffusion.
A multi-effects channel may also be routed to its
‘neighbouring’ reverb channel for dual reverb multi-effects.
To Next Page
Loading...
