SAVE
Page 206 S3200XL Operator’s Manual - Version 1.00
ALL PROGS+SAMPLES This will save all programs and samples only. The MULTI and
any effects files will be ignored and not saved.
ALL PROGRAMS ONLY This will save all the programs in memory but will not save the
samples associated with them. This is useful if you have made
any changes to one or more programs but you have not
edited any samples.
ALL SAMPLES This will save all the samples currently in memory. This is
useful if you have just had an extensive sample editing
session.
CURSOR PROG+SAMPLES This will save the selected program and its associated samples
only. This is useful when you make a small edit to a program.
CURSOR ITEM ONLY This will save the selected individual item be it a program, a
sample or a multi. You may also save effects files, ME-35T
Drum settings, D-D SONG files (called TL’s - take lists) and
Qlists.
OPERATING SYSTEM You may save the current operating system to disk (more on
this later).
MULTI+PROGS+SAMPS This will save the multi plus its associated programs and their
associated samples. It will also save the effects file.
NOTE: If you have programs in memory that you call up in the multi via program change
commands in the sequence (for example, you use MIDI program change to change the
acoustic piano sound used in the verse to an electric piano sound in the chorus), those
programs which are not currently in the multi at the time of saving will not be saved. Your
attention is brought to this as you may save a multi and then wonder why it is not playing back
correctly when you subsequently re-load it. If you do have programs in memory for selection via
the sequencer’s MIDI program change, use SAVE ENTIRE VOLUME.
To Next Page
Loading...
Need help?
General
