LOAD
S3200XL Operator’s Manual - Version 1.00 Page 221
It is possible that the chosen file(s) will occupy more memory space than is actually available, in
which case the loading process will be halted and you will receive this prompt:
Any files which have been completely loaded into memory prior to the prompt will remain in
memory, however.
Even if a file exists in memory with the same name as a file on disk, the disk file will still be
loaded and the file in memory will be overwritten.
If, for some reason, there is a problem with the hard disk (i.e. it is not connected or not switched
on or, if it’s a removable medium of some sort and the disk/cartridge is not inserted or write
protected), you will receive the message:
If the disk is un-formatted (or has become seriously damaged in some way) the S3200XL will
tell you:
NOTE: You will also receive this message when you select under the same
circumstances.
SCSI ID’s, etc., are explained a bit later in this section.
To Next Page
Loading...
Need help?
General
