INTRODUCTION
Page 12 S3200XL Operator’s Manual - Version 1.00
MIDI Your MIDI controller (keyboard, drum pads, EWI, etc.) should
be connected to the MIDI IN. The THRU socket carries a
duplicate of the MIDI IN signal ‘thru’ to other modules or MIDI
devices that may be connected. The OUT is normally only
used to transmit MIDI System Exclusive data to another Akai
sampler or to a computer.
POWER CONNECTION This should be connected to an AC power source.
** IMPORTANT NOTE **
BEFORE CONNECTING ANY AC POWER, PLEASE ENSURE THAT YOUR
UNIT IS DESIGNED FOR YOUR AREA’S POWER SUPPLY. A MISTAKE NOW
COULD RUIN YOUR WHOLE DAY NOT TO MENTION YOUR S3200XL!!!
To Next Page
Loading...
Need help?
General
