S3200XL Operator’s Manual - Version 1.00 i
WARNING
The S3200XL is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that your
S3200XL meets the power requirements in your area. If in doubt, consult a qualified electrician
or Akai Professional dealer.
120 VAC @ 60 Hz for USA and Canada
220~230/240 VAC @ 50 Hz for Europe
240 VAC @ 50 Hz for Australia
PROTECTING YOURSELF AND THE S3200XL
• Never touch the AC plug with wet hands.
• Always disconnect the S3200XL from the power supply by pulling on the plug, not the cord.
• Allow only an Akai Professional dealer or qualified professional engineer to repair or reassemble
the S3200XL. Apart from voiding the warranty, unauthorized engineers might touch live internal
parts and receive a serious electrical shock.
• Do not put, or allow anyone to put any object, especially metal objects, into the S3200XL.
• Use only a household AC power supply. Never use a DC power supply.
• If water or any other liquid is spilled into or onto the S3200XL, disconnect the power, and call
your dealer.
• Make sure that the unit is well-ventilated, and away from direct sunlight.
• To avoid damage to internal circuitry, as well as the external finish, keep the S3200XL away from
sources of direct heat (stoves, radiators, etc.).
• Avoid using aerosol insecticides, etc. near the S3200XL. They may damage the surface, and
may ignite.
• Do not use denaturated alcohol, thinner or similar chemicals to clean the S3200XL. They will
damage the finish.
• Modification of this equipment is dangerous, and can result in the functions of the S3200XL
being impaired. Never attempt to modify the equipment in any way.
• Make sure that the S3200XL is always well-supported when in use (either in a specially-
designed equipment rack, or a firm level surface).
• When installing the S3200XL in a 19" rack system, always allow 1U of ventilated free space
above it to allow for cooling. Make sure that the back of the rack is unobstructed to allow a clear
airflow.
• In order to assure optimum performance of your S3200XL, select the setup location carefully,
and make sure the equipment is used properly. Avoid setting up the S3200XL in the following
locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
WARNING
To Next Page
Loading...
Need help?
General
