Service SAP QoS Policy Command Reference
252 Quality of Service Guide
ip-criteria
Syntax [no] ip-criteria
Context config>qos>sap-ingress
Description IP criteria-based SAP ingress policies are used to select the appropriate ingress queue and
corresponding forwarding class for matched traffic.
This command is used to enter the context to create or edit policy entries that specify IP criteria such
as IP quintuple lookup or DiffServ code point.
The software implementation will exit on the first match found and execute the actions in accordance
with the accompanying action command. For this reason entries must be sequenced correctly from
most to least explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries
are removed from a SAP ingress policy, the IP criteria is removed from all services where that policy
is applied.
ip-criteria
Syntax [no] ip-criteria
Context config>qos>sap-egress
Description IP criteria-based SAP egress policies are used to select the appropriate ingress queue and
corresponding forwarding class for matched traffic.
This command is used to enter the context to create or edit policy entries that specify IP criteria such
as IP quintuple lookup or DiffServ code point.
The software implementation will exit on the first match found and execute the actions in accordance
with the accompanying action command. For this reason entries must be sequenced correctly from
most to least explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries
are removed from a SAP ingress policy, the IP criteria is removed from all services where that policy
is applied.
ipv6-criteria
Syntax [no] ipv6-criteria
Context config>qos>sap-egress
config>qos>sap-ingress
Description IPv6 criteria-based SAP egress/ingress policies are used to select the appropriate ingress queue and
corresponding forwarding class for matched traffic.
To Next Page
Loading...
