QoS ATM Traffic Descriptor Profiles
Quality of Service Guide 699
descriptor-type P0_1
no shaping
exit
atm-td-profile 2 create
...
----------------------------------------------
A:ALA-48>config>qos#
Service Management Tasks
This section discusses the following service management tasks:
• Removing a Profile from the QoS Configuration
• Copying and Overwriting Profile
• Editing QoS Policies
Removing a Profile from the QoS Configuration
The default ATM traffic descriptor profile cannot be deleted.
A:ALA-48>config>qos# no atm-td-profile 1
MINOR: ATM #1206 Cannot change Default Traffic Descriptor
A:ALA-48>config>qos#
To delete an ATM QoS traffic descriptor profile, enter the following command:
CLI Syntax: config>qos# no atm-td-profile traffic-desc-profile-id
Example: config>qos# no atm-td-profile 2
Copying and Overwriting Profile
You can copy an existing profile, rename it with a new profile ID value, or overwrite an
existing profile ID. The overwrite option must be specified or an error occurs if the
destination profile ID exists.
To Next Page
Loading...
