Publication 1756-UM050A-EN-P - December 2001
Interfacing with FLEX I/O 8-5
The Select Module Type window will open.
3. Select the 1756-ENBT EtherNet/IP Bridge and click on OK. The
Module Properties window will open.
4. Enter or select the following parameters: Name, IP Address, Slot,
and Electronic Keying. We used the following values:
5. Click on Finish to accept the configuration.
Name Local_ENB
IP Address 130.130.130.2
Slot 1
Electronic Keying Compatible Module
AB Parts
To Next Page
Loading...
