EasyManuals Logo

Allen-Bradley ControlLogix 1756-ENBT User Manual

Allen-Bradley ControlLogix 1756-ENBT
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
Publication 1756-UM050A-EN-P - December 2001
7-2 Using Produced and Consumed Tags
Set Up the Hardware
In both chassis the controller is in slot 0 and the 1756-ENBT module is
in slot 1.
To work along with this example set up your system as shown above.
Note that in the example application, the Logix5550 controllers
and the 1756-ENBT modules are in slots 0 and 1 in each
ControlLogix chassis, as shown.
Verify the IP addresses for the 1756-ENBT modules.
Verify that all wiring and cabling is properly connected.
Make sure you have your communication driver (e.g.,
AB-ETH-1) configured in RSLinx as described in Appendix C.
Data
Slot 0 1 Slot 0 1 2
Switch
Programming
130.130.130.1
Terminal
Logix5550
(Producer)
1756-ENBT
130.130.130.2
1756-ENBT
130.130.130.3
Logix5550
(Consumer)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley ControlLogix 1756-ENBT and is the answer not in the manual?

Allen-Bradley ControlLogix 1756-ENBT Specifications

General IconGeneral
BrandAllen-Bradley
ModelControlLogix 1756-ENBT
CategoryControl Unit
LanguageEnglish

Related product manuals