Publication 1756-UM050A-EN-P - December 2001
5-10 Using Rack Optimized I/O
5. Click on the Finish button to save the configuration.
The digital input module will appear in the I/O configuration
indented under the remote 1756-ENBT module.
Add the Remote Digital Output Module
6. Right click on the remote 1756-ENBT module and again select
New Module.
TIP
If you want to alter the default parameters, click on
the Next button. Refer to the ControlLogix Digital I/O
User Manual, publication 1756-6.5.8, for details.