Publication 1756-UM050A-EN-P - December 2001
8-6 Interfacing with FLEX I/O
Add the FLEX I/O Adapter to the I/O Configuration
Next, you must add the 1794-AENT adapter as a “child” of the local
1756-ENBT module.
1. In the Project window, right click on the local 1756-ENBT module
under the I/O Configuration folder and select New Module from
the pop-up window. The Select Module Type window will open.
2. Select the 1794-AENT/A Ethernet adapter from the list and click on
OK.
To Next Page
Loading...
