Publication 1756-UM050A-EN-P - December 2001
4-6 Configuring the 1756-ENBT Module
Saving the Relation List
You can save the Relation List to be used later. To save the Relation
List perform the following steps:
1. Select Save As... from the File menu. You will see the following
window.
2. Select the folder you want to Save in:
3. Enter a File name for the Relation List (e.g., “Control System
Configuration”) and click on Save.
You can leave the Save as type at the default setting (Bootp Config
Files (*.bpc).