Allen-Bradley ControlLogix 1756-ENBT - Add the Remote (Producer) Controller to the I;O Configuration

Publication 1756-UM050A-EN-P - December 2001
Using Produced and Consumed Tags 7-13
Add the Remote (Producer) Controller to the I/O Configuration
You must now add the remote Controller (the Producer) to the I/O
Configuration under the remote 1756-ENBT module.
1. Right click on the remote 1756-ENBT module under the I/O
Configuration folder and select New Module.
The Select Module Type window will open.
2. Select the 1756-L1 ControlLogix5550 processor and click on
OK.
AB Parts