Publication 1756-UM050A-EN-P - December 2001
Using Produced and Consumed Tags 7-3
Create the Producer
Application
Perform the following steps to create the producer application.
1. Start RSLogix5000. The RSLogix 5000 Main Window will open.
2. From the File menu, select New.
The New Controller window will open.
3. Enter an appropriate name for the Controller, e.g., “Producer.”
4. Select the correct Chassis Type and Slot Number for the
Logix5550 controller, and the folder where you want to save the file
(Create In).
5. Click on OK to save the project file.
AB Parts
To Next Page
Loading...
Need help?
General
