Publication 1756-UM050A-EN-P - December 2001
8-12 Interfacing with FLEX I/O
Edit the Controller Tags
When you add modules to the I/O configuration the system creates
tags for those modules to use in the application program. For the
example application you need to add one more Controller Tag.
1. Double-click on the Controller Tags folder in the project window.
The Controller Tags window will open. You will see the tags
created for the 1794-AENT and digital I/O modules.
2. Make sure the Edit Tags tab at the bottom of the Controller Tags
window is selected and create the following tag:
3. Close the Controller Tags window.
Enter the new tag here
Tags created
by the system
Tag Type
Parts_Count Counter
To Next Page
Loading...
