Allen-Bradley ControlLogix 1756-ENBT User Manual

Publication 1756-UM050A-EN-P - December 2001
Interfacing with FLEX I/O 8-11
The Module Properties window will open.
7. Enter or select the following parameters (the values we used are
listed in the table):
8. Click on the Finish button to accept the configuration. The I/O
Configuration in the Project window should look similar to the one
shown below.
Name FLEX_Digital_Output
Slot 1
Comm Format Rack Optimization
Electronic Keying Compatible Module
AB Parts

Allen-Bradley ControlLogix 1756-ENBT Specifications

General

Brand	Allen-Bradley
Model	ControlLogix 1756-ENBT
Category	Control Unit
Language	English