Publication 1756-UM050A-EN-P - December 2001
Using Analog I/O with Direct Connection 6-11
Download the Program
1. Click on the Communications menu and select Who Active.
2. The Who Active window will open (Your window will display the
drivers and devices you have configured on your system).
3. Select your Ethernet driver (e.g., AB_ETH-1) and expand the tree
through the backplane of the local ControlLogix chassis.
4. Highlight the controller and click on the Download button to
download the program to the Logix5550 controller.
You will see a message similar to the following:
5. Click on the Download button.
6. Minimize RSLogix5000.
AB Parts
To Next Page
Loading...
Need help?
General
