Publication 1756-UM050A-EN-P - December 2001
5-4 Using Rack Optimized I/O
You now add the remote digital I/O modules to the controller’s I/O
configuration. To do this you first add the local 1756-ENBT module to
the I/O configuration. Next you add the 1756-ENBT in the remote
chassis with the digital I/O modules as a “child” of the local
1756-ENBT module. Then you add the I/O modules as “children” of
the remote 1756-ENBT module.
Add the Local Ethernet Bridge to the I/O Configuration
1. Select the IO Configuration folder in the project window and
click the right mouse button.
The following pop-up window will open.
2. Click on New Module.
To Next Page
Loading...
Need help?
General
