Publication 1756-UM050A-EN-P - December 2001
Interfacing with FLEX I/O 8-7
The Module Properties window will open.
3. Enter or select the following parameters (the values we used are
listed in the table):
4. Click on Next. The following page will open:
5. Verify that the Requested Packet Interval (RPI) is appropriate for
your system (10ms for this example). This will be used for the rack
optimized connection to the I/O modules.
6. Click on the Finish button to accept the configuration.
Name FLEX_IO_Adapter
IP Address 130.130.130.3
Comm Format Rack Optimization
Chassis Size 8 (default)
Electronic Keying Compatible Module
AB Parts
To Next Page
Loading...
Need help?
General
