Allen-Bradley Stratix 5700 User Manual

Rockwell Automation Publication 1783-UM007G-EN-P - February 2017 257
Configure Switch Features Chapter 7
If traffic is routed through a Layer 2 switch (Figure 29 and Figure 30), you
define the following.
• A private-to-public translation for each device on the private subnet that
communicates on the public subnet.
• A public-to-private translation for each device on the public subnet that
communicates on the private subnet.
Figure 29 - Layer 2 Example with NAT in Stratix 5700 Switch
VLAN 10
Machine 1
Controller 2 to Line Controller
Stratix 5700 with NAT
(NAT Instance 2)
192.168.1.2
Line Controller
10.10.1.100
192.168.1.100
Stratix 5400 Layer 2 Firmware Model
VLAN 10: 10.10.1.1
I/O
192.168.1.11
Drive
192.168.1.12
VLAN 10
VLAN 10
VLAN 10
HMI 10.10.1.101
VLAN 10VLAN 10
Machine 2
Controller 2
192.168.1.10
10.10.1.11
Controller 1 to Line Controller
VLAN
10
V
VL
AN
1
0
Ma
Ma
Ma
Ma
ch
ch
ch
ch
in
in
in
in
e
e
e
1
1
1
VL
AN
1
0
V
Stratix 5700 with NAT
(NAT Instance 1)
192.168.1.2
I/O
192.168.1.11
Drive
192.168.1.12
Controller 1
192.168.1.10
10.10.1.10

Allen-Bradley Stratix 5700 Specifications

General

Model	Stratix 5700
Port Types	RJ45, SFP
Mounting	DIN Rail or Panel Mount
Dimensions	Varies by model
Weight	Varies by model
Management	Web-based, SNMP, Command Line
Redundancy	Device Level Ring, STP, RSTP
Operating Temperature	-40°C to 70°C
Power Supply	Dual DC inputs
Input Voltage	24 VDC or 100-240 VAC
Protocols	EtherNet/IP, DLR
Security Features	SSH, HTTPS, RADIUS, TACACS+