The overall Extract Speed reached is dependent on the Step Time.
The Step Time accounts for Drain Time, one (1)Balance Meas-
urement Time and Spin Time. Additional balance measurements
will not subtract time from the step. If enough time isn’t given to
reach a programmed speed, the step will advance without reach-
ing the set speed.
It is recommended not to reduce spin times within the default cy-
cles. Better machine performance is achieved with the default
spin times.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
99 Part No. F8615401ENR4
To Next Page
