Operating
161
0000010038-003- GB
Operating
6.6.7 Parallel cutting device
Parallel cutting device
Parallel cutting of long, narrow parts is done to the left of the saw blade. The
PALIN and PALIN_D parallel cutting devices are good for this. In parallel cut-
ting, the flip stop is set to the same dimension at the crosscut fence and at the
PALIN. The workpiece can be placed safely and be guided easily on the left of
the saw blade.
Parallel cutting device with digital dimension display and precision set-
ting system
Fig. 6-90 PALIN parallel cutting device
Fig. 6-91 PALIN D parallel cutting device
To Next Page
Loading...
