Operating
90
Operating
0000010038-003- GB
6.2 Working examples
General information
The Altendorf sliding table saw is a universal machine that can be used for va-
rious saw cuts. However, the machine must be set up appropriately.
Tools
First, make sure that you only use saws in perfect condition, that the riving knife
is correctly set and that the top protection hood is lowered close above the
workpiece to be cut. The latter is also particularly important for ensuring perfect
functioning of the top extraction system.
Rotational speed
Position of the hands
Lay your hands flat on the workpiece with fingers and thumbs close together,
and with sufficient safety clearance from the saw blade.
For further information about safe working, refer to the following description of
the individual work steps.
i
Note!
Make sure that the correct rotational speed is set and, after the machine
has been switched on, do not start pushing the workpiece forward until
the saw blade has reached its full rotational speed.
To Next Page
Loading...
