Faults/problems/troubleshooting
192
Faults/problems/troubleshooting
0000010038-003- GB
8 Faults/problems/troubleshooting
8.1 Machine diagnosis
The display shows when limit switches have been actuated at protective de-
vices and so on. There are two function groups.
Function group 1:
• Motor temperature
• Machine door
• Lower saw blade cover
• EMERGENCY STOP button
• Sliding table limit switch
Function group 2:
• Brake unit
Response by function group 1:
Machine drives are switched off or cannot be started
Response by function group 2:
Machines will not start
Indication to request a service technician to check the functioning
To Next Page
Loading...
