Altendorf F45 ProDrive - Certificates

Identification
7
0000010038-003- GB
Identification
2.2 Certificates
Conformity declaration as defined by the machinery directive, Annex II 1A
-Translation of the Original-
Manufacturer: Wilhelm Altendorf GmbH & Co. KG
Wettinerallee 43/45
32429 Minden
Germany
Person authorised to compile the
technical documentation:
Jörg Pöppelmann, Head of the mechanical design department
Wilhelm Altendorf GmbH & Co. KG
Product: Sliding table saw, type F45
Machine number:
Authority named for prototype testing
according to annex IX:
DGUV Test Prüf-und Zertifizierungsstelle Holz
Fachbereich Holz und Metall
Vollmoellerstraße 11
70563 Stuttgart
Germany
Identification number 0392
We hereby declare that the above-mentioned product conforms with all applicable regulations of machi-
nery directive 2006/42/EC. It fulfils the requirements of the following applicable directives:
- Low-voltage directive 2006/95/EC
- EMC directive 2004/108/EC
The following harmonised standards have been applied:
- DIN EN 1870-18:2007:2013, Safety of woodworking machines - Circular sawing machines - Part 18:
Dimension saws
- DIN EN ISO 12100 :2011-03 Safety of machinery - General principles for design - Risk assessment and
risk reduction
- DIN EN 60204-1:2007:-06, Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
Minden, 10/11/2016
_______________________________________________
Piotr Szablewski, Manager of Development & Construction