Altendorf F45 ProDrive - Emissions

Product description
25
0000010038-003- GB
Product description
3.5 Emissions
3.5.1 Noise - characteristic values
The noise emission values determined according to DIN EN ISO 3746 for the
sound power level or DIN EN ISO 11202 and for the sound pressure level at
the workplace on the basis of the working conditions stated in ISO 7960 Appen-
dix A are as listed in the table.
A measurement uncertainty allowance of K = 4 dB (A) applies to the stated
emission values.
The stated values are emission levels and therefore not necessarily levels for
safe working. Although there is a correlation between emission and immission
levels, it cannot be reliably deduced from this whether or not additional precau-
tionary measures are needed to protect operators.
Sound power level
[dB (A)]
Emission
sound level
at the workplace
[dB (A)]
Tools
Idling_____L
WA
= 87.3
Cutting__L
WA
= 96.6
Idling_____L
PA
=77.4
Cutting__L
PA
= 84.0
Circular saw blade
300x3.2/96 WZ
n = 3987 rpm
Idling_____L
WA
= 101.3
Cutting__L
WA
= 104.2
Idling_____L
PA
=95.7
Cutting__L
PA
= 92.1
Circular saw blade
350x3.5/54 WZ
n = 3987 rpm
Idling_____L
WA
= 93.9
Cutting__L
WA
= 98.7
Idling_____L
PA
=84.1
Cutting__L
PA
= 89.9
Circular saw blade
350x3.5/84 WZ
n = 3987 rpm
Idling_____L
WA
= 93.9
Cutting__L
WA
= 99.1
Idling_____L
PA
=84.5
Cutting__L
PA
= 86.0
Circular saw blade
303x3.2/60 DH
n = 3987 rpm
LOW NOISE
Idling_____L
WA
= 87.7
Cutting__L
WA
= 96.3
Idling_____L
PA
=78.1
Cutting__L = 84.6
Circular saw blade
303x3.2/90 WZ
n = 3987 rpm
LOW NOISE