Faults/problems/troubleshooting
199
0000010038-003- GB
Faults/problems/troubleshooting
8.4 Electronic brake module
The main saw shaft is braked with an electronic brake module. This brake mo-
dule is located in the contractor control housing, and is accessible when the
rear panels have been removed.Braking is controlled in such a way that there
is a high brake current at the beginning of braking. This is reduced over time to
ensure smooth braking. In addition, a standstill monitoring facility switches off
the brake current if the motor is standing still. The brake module contains vari-
ous function blocks for control and monitoring tasks. There is also a communi-
cations connection for machine control.
To Next Page
Loading...
