Product description
16
Product description
0000010038-003- GB
3 Product description
3.1 Marking, pictographs
3.2 Intended use
The sliding table saw and the workpiece guide equipment supplied with it are
intended to be used for cutting wood and similar materials such as:
• Laminated and unlaminated board materials (e.g. chipboard, coreboard,
MDF board, ...)
• Solid wood
• Veneer with a suitable clamping device
• Gypsum plasterboard
• Cardboard
• Dimensionally stable plastics (thermoset plastics, thermoplastics). Sawing
these materials does not normally involve any risks in respect of dust,
chips, and thermal degradation products.
• Aluminium/aluminium forging alloy in conjunction with the spraying unit
option
Danger warning Hand injury warning Laser beam warning
Crushing risk warning Voltage warning Note: Wear ear pro-
tection
To Next Page
Loading...
