Product description
17
0000010038-003- GB
Product description
The sliding table saw and the workpiece guide equipment supplied with it are
not intended to be used for cutting materials such as:
• Sheet steel
• Sheet brass
• Sheet copper
• Round wood without the use of a suitable clamping device
Tools:
• The chosen saw blade must be suitable both for the specific work cycle
(e.g. longitudinal cutting or crosscutting) and for the specific material.
• Only circular blades which are solid chrome vanadium (CV) or tungsten
carbide tipped (TCT) and have a maximum width of 20 mm are permitted
for the main saw and milling/grooving cutter. The middle table strip and the
cushioning disc must be removed when using a milling/grooving cutter.
• Saw blades with a maximum diameter of 120 mm are permissible for the
scoring saw with a machine swivelling to one side.
• Saw blades with a maximum diameter of 180 mm are permissible for the
scoring saw with a machine swivelling to both sides.
• Saw blades made of high-alloy high-speed steel (HSS) may not be
used.
• Wobble units may not be used.
To Next Page
Loading...
