Operating
98
Operating
0000010038-003- GB
6.3 Machine operation
6.3.1 Main switch
The main switch is located on the outside of the RH switch cabinet.
Before turning on the saw drives, the main switch must be moved to setting I.
The machine control unit carries out a self-test, after which the available axes
and their current values are displayed.
Grey/black main switch
The main switch does not have an EMERGENCY STOP function! When the
machine is turned off with the main switch, the saw drives run down unbraked!
Red/yellow main switch
The main switch has an EMERGENCY STOP function! When the machine is
turned off at the main switch, the main saw drive is braked.
Fig. 6-21 Main switch
To Next Page
Loading...
