Maintenance and repairs
206
Maintenance and repairs
0000010038-003- GB
10 Maintenance and repairs
10.1 General
Keeping a supply of the most important spare and wear parts on site is an im-
portant prerequisite for the constant functioning and operating capability of the
sliding table saw. We only accept a guarantee for original spare parts supplied
by us. We expressly point out that original spare parts and accessories not sup-
plied by us have not been checked and released by us. Therefore, the fitting
and/or use of such products may negatively influence the properties of the sli-
ding table saw and thus impair its active and/or passive safety. Wilhelm Alten-
dorf GmbH&Co. KG will not accept any liability or guarantee for damage
resulting from the use of non-original spare parts and accessories.
Please note that special production and delivery specifications exist for our own
and our suppliers' parts, and that we always supply spare parts that meet the
latest state of the art and comply with the latest statutory regulations.
Please refer to the spare parts list when ordering spare parts.
For further information please refer to the spare parts drawings included in the
spare parts list.
When ordering spare parts, please state the following information:
• Machine no.
• Article no.
To Next Page
Loading...
