Operating
149
0000010038-003- GB
Operating
6.6.4 Dimension display unit DIGIT L
The dimensions that have been set are displayed digitally in the 150 mm to
3200 mm range to an accuracy of ± 0.1 mm. The proximity sensor operates
wear-free and is not sensitive to dust. A precise adjustment system is used for
precision setting in 1/10 mm increments.
Operating the display electronics
Press button 1: switches over the throw-over stop side. Pressing button 2, 3 or
4 changes the measuring range on the display electronics. Throw-over stop 1
is permanently connected to the measuring system and the display unit. The
measuring range is from approx. 150 mm to approx. 1630 mm. Throw-over
stop 2 is a flip stop and, when it makes contact at the left of throw-over stop 1,
it is at a distance of 295.0 mm from throw-over stop 1. This results in a measu-
ring range of approx. 445 mm to approx. 1750 mm. If throw-over stop 2 is pu-
shed onto the length extension, this results in a measuring range of about 1750
mm to 3200 mm; if necessary, the length extension can be connected to throw-
over stop 1 with the aid of the detent bolt.
Fig. 6-73 DIGIT L
Fig. 6-74 DIGIT L display unit
To Next Page
Loading...
