Product description
19
0000010038-003- GB
Product description
Machine operator positions:
The sliding table saw is intended to be operated from the following operator po-
sitions:
1. On the left of the sliding table at the front of the machine, seen in the feed
direction (main operator position).
2. At the front cross-end of the machine on the right of the sliding table when
working with the rip fence (make sure you do not move your body or parts
of it into the blade rotation area).
3. Any person removing the workpieces must stand at the rear cross-end of
the machine behind the main table length extension (under no circumstan-
ces in the sliding table traverse area)!
Fig. 3-1 Machine operator positions
Warning!
When removing workpieces at the rear of the machine, ensure that you
keep sufficient distance from the extending telescopic tube.
Non-adherence may lead to knee injuries!
i
Note!
Any other use is deemed as unintended. ALTENDORF will not be liable
for any kind of injury or damage that may result from such unintended
use; the risk thereof is borne by the user alone.
Unauthorised modifications by users to the machine or its electrical parts
and the use of non-original parts on the machine exclude any liability by
the manufacturer for any resulting injury or damage.
To Next Page
Loading...
