Transport, siting and installation
48
Transport, siting and installation
0000010038-003- GB
Table top expansion 1600/2000 with base support:
Assembly steps:
• Place the TPL onto the brackets on the table top and insert the fastening
screws of the support arms into the holes on the table top face end.
• Loosely secure to the table top with two M10 nuts and U-shaped washers
• Screw-fit the TPL to the aluminium brackets
• Tighten the M10 nuts.
• If necessary, correct the alignment and flushness by readjusting the adjus-
table feet (3) and/or the support screws (1).
Fig. 5-7 TPL 1600/2000
[1] Support screws
[2] Fastening screws
[3] Adjustable feet
To Next Page
Loading...
