MM-400A
3. Packaging
3-4
Item Model
Displacement sensor
*8
(Ono Sokki)
GS-1830A (30 mm) (cable length of 1.9 m)
GS-1813A (13 mm) (cable length of 1.9 m)
Displacement sensor
relay cable
*8
SK-1194374 (cable length of 0.15 m)
I/O conversion cable
(used for conversion of
external I/O signals when
replacing the MM-370
series with MM-400A)
SK-1201953 (cable length of 0.15 m)
*1: Used with the current/force sensor.
*2: Connecting cable when using MA-520-01, MA-521-01 and MA-522-01. Not
required when using MA-520B-00, MA-521B-00 and MA-522B-00.
*3: Load cell conversion cable SK-1200820, SK-1200821 or SK-1200822 is
required.
*4: Load cell conversion cable SK-1201977 is required.
*5: Extension cable for LGK-110. Use as needed.
*6: A combination of the sensor head, sensor head cable, mounting amplifier unit,
and relay connector is required.
*7: Displacement sensor conversion cable SK-1179208 is required.
*8: Displacement sensor relay cable SK-1194374 is required.
*9: Load cell and displacement sensor corresponding to our follow-up mechanism
element. (Some are special order items.)
*10: Displacement sensor conversion cable SK-1211379 is required.
*11: The measurement range of LG-100-150 is 50 mm, but it will be 30 mm when
connected to the MM-400A.
*12: Extension cable for LG200-110, LG100-125 and LG100-150. Use as needed.
*13: LGK-110 has been discontinued. LG200-110 is an alternative.
To Next Page
Loading...
