AmScope MU USB3.0 - Measurement Menu Functions; Measurement Menu Settings

125
MU Series (Windows)
User’s Manual
Measurement Menu Funcons
Measurement Menu
The “Measurements” menu is a drop down representaon of the measurements tool bar, as covered in the
earlier secons of this manual. The only new addions to this are the “Z Order” and “Scale Bar” tools, which
we will cover here. Note: All of these tools will show values in pixels (px) unless calibrated to a unit of known
measurement. Please see the “Calibraon” secon under “Opons Menu” in this manual for instrucons on
calibraon.
Scale Bar... - This menu opon enables the user to place a scale bar on the image for easy reference of size.
Z Order - “Z Order” contains a menu that refers to the posion of an item relave to other items superimposed
on the image, much like the layer system, and allows manipulaon of items to appear in front of or behind
each other by moving them along the “Z” dimension (depth).