AmScope MU USB3.0 - High Dynamic Range

72
MU Series (Windows)
User’s Manual
Process Menu Tools
High Dynamic Range
“High Dynamic Range” is a post processing funcon that can fuse a sequence of mul-exposure images into a
single image with a larger dynamic range (higher range between maximum and minimum contrast levels). The
process requires the user to capture mulple images of the same point in their sample with dierent levels of
exposure or dierent apertures on the microscope’s iris diaphragm for this to work.
The HDR funcon can be used either in the browse window or the image viewing area window, provided the
images are selected if in the browse window, or are open in the image viewing area. Both methods will provide
the same result.
1. Much like the “Stch” funcon, if you select the menu with photos captured in the viewing area, you will be
taken to a menu where you can add images to a list of images for the funcon to use. Add any desired images
taken at the same posion with mulple types of exposure.
Note: Unless mulple images are captured or selected in the browse mode, the HDR funcon will be grayed
out. If unable to access the funcon, as shown above, please capture at least 2 images in the viewing area, or
select at least 2 images in the browse menu.