AmScope MU USB3.0 - Deinterlace

80
MU Series (Windows)
User’s Manual
Process Menu Tools
Deinterlace
The “Deinterlace” funcon allows a user to take an interlaced image (one which is processed in a series of
rows, displaying a paral or blurred image unl all rows have been processed) into a deinterlaced image (one
which displays at the same me. Interlacing is used to allow incremenetal loading of large resoluon images
on slower connecons, at the expense of knowing when the image is done loading (such as with a progressive
scan image, which will enlarge row by row unl the full image is seen).
While the AmScope/ToupView soware and cameras by default captured deinterlaced images, if a user wished
to use our soware to deinterlace ain image sent to them, this funcon can be performed here. The major
benet of a deinterlaced image is that it is processed row by row when displaying, and will enlarge unl the full
image is seen (easier to tell when it is fully loaded), and they are beer to compress when using on the web or
sending to other clients.
When an image is open, deinterlacing is performed by clicking the tool under the “Process” menu. It will be
grayed out if no image is available to deinterlace. There are no adjustment menus to this process--deinterlac-
ing will be performed as soon as the tool is clicked.