3.5 Audio Generator Function
3-59
3
Measurement
■
Setting range
When Output Type is Bal.:
0.001 to 12.400 Vrms
When Output Type is Unbal.:
0.001 to 6.200 Vrms
Output Tone2
■
Summary
Sets the Tone2 to On/Off.
This setting is enabled when Waveform is set to Tones.
■
Options
On Sets Tone2 to On.
Off Sets Tone2 to Off.
Tone2 Freq
■
Summary
Sets the Tone2 frequency.
This setting is enabled when Waveform is set to Tones.
■
Setting range
10.0 to 50000.0 Hz
Tone2 Level
■
Summary
Sets the Tone2 level.
This setting is enabled when Waveform is set to Tones.
■
Setting range
When Output Type is Bal.:
0.001 to 12.400 Vrms
When Output Type is Unbal.:
0.001 to 6.200 Vrms
Output Tone3
■
Summary
Sets the Tone3 to On/Off.
This setting is enabled when Waveform is set to Tones.
■
Options
On Sets Tone3 to On.
Off Sets Tone3 to Off.
To Next Page
Loading...
