Chapter 3 Measurement
3-74
■
Options
Off Does not generate signals.
On Generates Tone signals.
User Wave Generates the signal of the User file selected in
Select AF1 Wave setting. If waveform has not
been selected in Select AF1 Wave, the options are
not displayed.
AF2 Tone
■
Summary
Selects the signal output of AF2 signal source.
■
Options
Off Does not generate signals.
On Generates Tone signals.
AF1 Tone Frequency
■
Summary
Sets the Tone frequency of AF1 signal source.
■
Setting range
20.0 to 40000.0 Hz
AF2 Tone Frequency
■
Summary
Sets the Tone frequency of AF2 signal source.
■
Setting range
20.0 to 40000.0 Hz
AF1 Tone Deviation (FM)
■
Summary
Sets the Deviation of AF1 signals.
Displayed when Modulation is set to FM.
■
Setting range
0.0 to 100000.0 Hz
AF2 Tone Deviation (FM)
■
Summary
Sets the Deviation of AF2 signals.
Displayed when Modulation is set to FM.
■
Setting range
0.0 to 100000.0 Hz
To Next Page
Loading...
