Anritsu MX269018A - Page 35

2.1 Part Names
2-9
2
Preparation
11 Monitor Out connector
Connects external display.
12 AC inlet
Supplies power.
13 SA Trigger Input connector
This is a BNC connector used to input the external trigger signal (TTL)
for the SPA or SA application.
14 SG Trigger Input connector
This is a BNC connector used to input the external trigger signal (TTL)
for the vector signal generator option.
15 Primary HDD/SSD Primary HDD/SSD
This is a standard HDD
(MS2830A)
or SSD
(MS2840A)
slot.
16 Secondary HDD/SSD Secondary HDD/SSD
This is an optional HDD
(MS2830A)
or SSD
(MS2840A)
slot.
Monitor Out