Chapter 3 Measurement
3-6
3.1.2.1 When Audio Analyzer Option is installed
When the MS2830A-018/118 Audio Analyzer is installed, the speaker is
built-in the MS2830A. MS2840A does not support the Audio Analyzer
option.
When selecting FM modulation in TX measurement mode for continuous
measurement, demodulated FM signal can be output from the speaker.
The speaker output can be monitored by connecting a headphone, etc. to
the headphone output connector. For the position of the headphone output
connector, refer to 2.1.2, “Rear Panel”.
To Next Page
Loading...
