3.4 TX Measurement Mode
3-31
3
Measurement
AF Level Set Reference
■
Summary
Adds the display of relative value results as the AF Power
measurement results. Using the AF Power measurement result as
a 0 dB reference (when this function is set to On), this displays the
relative value results of subsequent AF Power measurements.
AF Level reference value can be manually set by AF Level
Reference Value.
Note:
This can be set to On only when AF Level measurement results are
displayed.
■
Options
On Displays the AF Level measurement results in
relative value.
Off Hides the AF Level measurement results in
relative value.
RF Frequency Correction
■
Summary
Selects whether to output carrier frequency deviation as DC offset
for AF demodulation when measuring FM or Wide FM. Enabled
when Modulation is set to FM or Wide FM.
■
Options
On Carrier frequency deviation is not output as DC
offset for AF demodulation.
Off Carrier frequency deviation is output as DC
offset for AF demodulation.
AF Level Reference Value
■
Summary
Sets the AF Level Reference value for calculating the AF Level Set
Reference.
Note:
Available only when AF Level Set Reference is On.
■
Setting range and Resolution
Mode Modulation Lower Upper Unit Resolution
Tx FM 0.01 200 000.00 Hz 0.01 Hz
AM 0.00001 100.00000 % 0.00001%
PM 0.00001 5000.00000 rad 0.00001 rad.
To Next Page
Loading...
